1. Dashboard
  2. Mitglieder
    1. Letzte Aktivitäten
    2. Benutzer online
    3. Team
    4. Mitgliedersuche
  3. Filebase
  4. Forum
  5. Zebradem-WIKI
  6. Foren-Regeln
  7. Spenden Liste
    1. Spenden
  • Anmelden
  • Registrieren
  • Suche
ZebraDem-Sponsoring
Dieses Thema
  • Alles
  • Dieses Thema
  • Dieses Forum
  • Seiten
  • Dateien
  • Forum
  • Erweiterte Suche
  1. Forum
  2. Receiver
  3. D-Box II
  4. Flashen und Debuggen

Box bootet nicht mehr...

  • jimbob
  • 6. April 2007 um 23:44
  • jimbob
    Gast
    • 6. April 2007 um 23:44
    • #1

    nabend, wie im titel schon genannt.. meine box bootet seit einigen stunden nicht mehr. Man sieht kurz den bootscreen und danach bootet die box wieder von neu.. und das in einer endlosschleife.
    Hab schon alles mögliche versucht.
    Der dbox2-bootmanager will auch nicht so wirklich ein image lässt sich nicht aufspielen.
    Anpingen oder sonstige sachen sind auch nicht mehr möglich.

    log vom dbox2-bootmanager:

    Zitat


    debug: Got Block #0032

    will verify ELF image, start= 0x800000, size= 149536
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ........................ done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63 sectors
    ### FS (jffs2) loading 'vmlinuz' to 0x100000
    ### FS load complete: 663919 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 663855 Bytes = 648.3 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... Error: inflateInit2() returned -4
    GUNZIP ERROR - must RESET board to recover
    debug: DDF: Calibrating delay loop...
    debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-c8.e7.19.07.00.00-59
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0032

    will verify ELF image, start= 0x800000, size= 149536
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ........................ done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63 sectors
    ### FS (jffs2) loading 'vmlinuz' to 0x100000
    ### FS load complete: 663919 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 663855 Bytes = 648.3 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... Error: inflateInit2() returned -4
    GUNZIP ERROR - must RESET board to recover
    debug: DDF: Calibrating delay loop...
    debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-c8.e7.19.07.00.00-59
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0032

    will verify ELF image, start= 0x800000, size= 149536
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ........................ done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63 sectors
    ### FS (jffs2) loading 'vmlinuz' to 0x100000
    ### FS load complete: 663919 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 663855 Bytes = 648.3 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... Error: inflateInit2() returned -4
    GUNZIP ERROR - must RESET board to recover
    debug: DDF: Calibrating delay loop...
    debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-c8.e7.19.07.00.00-59
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0032

    will verify ELF image, start= 0x800000, size= 149536
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ........................ done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63

    Alles anzeigen


    Ich hoffe das ihr mir helfen könnt.
    vielen dank im voraus

    • Zitieren
  • f-stecker
    Gast
    • 7. April 2007 um 04:37
    • #2

    Moin jimbob


    debug: Given up BOOTP/TFTP boot

    kam der Bootrequest nicht beim PC an. In den meisten Fällen konnten sich Box und
    PC nicht schnell genug auf eine Verbindungsgeschwindigkeit einigen, so daß der
    einzige Bootrequest des Bootmanagers in's Leere geht. Abhilfe schaffen entweder
    der Flash-Assistent, welcher die Box anweist, den Bootrequest 10 Mal zu wieder-
    holen:
    Versuchs mal bitte so:
    und damit Box um PC genügend Zeit zu geben, die Geschwindigkeit auszuhandeln,
    oder folgende Methode bei Verwendung des Bootmanagers:


    * Box über gleichzeitiges Drücken der Standby- und Pfeil-nach-oben-Taste an der
    Front resetten
    * Standby-Taste loslassen, Pfeil-Taste weiter gedrückt halten bis das Prompt in
    der seriellen Konsole erscheint
    * in der seriellen Konsole "boot net" eingeben und Enter drücken.
    mfg.

    • Zitieren
  • jimbob
    Gast
    • 7. April 2007 um 13:44
    • #3

    Ah vielen dank ! Das bundesliga wochenende ist gerettet :) funktioniert 1a :)

    • Zitieren
  • f-stecker
    Gast
    • 7. April 2007 um 15:17
    • #4

    Hallo jimbob

    das Freud mich das du es hinbekommen hast.

    und viel Spaß mit der BL.
    mfg.

    • Zitieren

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!

Benutzerkonto erstellen Anmelden

Spenden

Vielen Dank für die Unterstützung!
Hiermit unterstützt du Zebradem.
Das beinhaltet überwiegend die Serverkosten und Lizenzgebühren.
Spenden

Letzte Beiträge

  • ACEMAGIC M1 Review – Der kompakte Kraftprotz mit Ryzen-Power

    heugabel 19. Mai 2025 um 08:27
  • Plex Live TV / LG Channels / Wedo TV

    Fellfresse 18. Mai 2025 um 17:06
  • Samsung TV Plus/Rakuten TV

    Fellfresse 18. Mai 2025 um 17:01
  • Abmahngefahr durch Likes: Gericht in den USA sieht Social-Media-Interaktionen als Beweis

    heugabel 18. Mai 2025 um 15:27
  • BREIN Licht ins Dunkel: Illegale IPTV-Anbieter stark unter Druck

    heugabel 17. Mai 2025 um 16:27
  • Pluto TV

    Fellfresse 16. Mai 2025 um 21:07
  • VPN-Blockade in Frankreich: Gericht ordnet Sperre illegaler Streams an

    heugabel 16. Mai 2025 um 20:27
  • Kaffeetasse, KI und Scheidung: Ein merkwürdiger Fall aus Griechenland

    heugabel 16. Mai 2025 um 16:27
  • Telegram räumt auf: Ein radikaler Schritt gegen Onlinekriminalität

    heugabel 16. Mai 2025 um 15:27
  • MagisTV/FlujoTV: IPTV-Piraterie und ihre rechtlichen Konsequenzen

    heugabel 16. Mai 2025 um 08:27

Aktivste Themen

  • Umbau D-Box II von Philips

    64 Antworten
  • Ich brauche hilfe

    55 Antworten
  • D Box bootet nicht

    53 Antworten
  • Nokia DBox2 nach flashen kein start mehr

    46 Antworten
  • Nokia 2xI Bmon 1.0

    43 Antworten
  • Flash auslöten , Bootloader neu flashen?

    41 Antworten
  • Komme nicht in Debug-Modus

    39 Antworten
  • Neues Image aufspielen

    36 Antworten
  • Box resettet immer

    35 Antworten
  • falsch geflasht - Box startet nicht

    32 Antworten

Benutzer online in diesem Thema

  • 1 Besucher
  1. Kontakt
© 2024 Zebradem - Software by WoltLab