Box verhält sich nach flashen seltsam

    Hallo,
    dies ist mein erster Post in diesem Bord,aber nun bin ich mit meinem Latein am Ende.......

    Folgendes,
    ich flashe die Box normal mit Hallenberg und es läuft auch alles ganz normal ab.Bis zum ende wo Hallenberg dann das Image prüft. Dann steht im Box Display Fehlerhaft.
    Starte ich nun die Box,fährt sie hoch und da wo eigentlich der bootvorgang zu ende sein sollte,sprich der sendername erscheinen soll geht sie komplett aus und lässt sich nur noch mit Steckerziehen zum Neustert bewegen.

    Es handelt sich um eine Nokia Dbox2 Kabel.

    Hat jemand eine Idee was das ist????

    Besten Dank im Vorraus.

    Versuche mal ein anderes Image wie zB.MD drauf zu machen ob da auch der Fehler kommt, wenn nicht gehe ich davon aus das dein Image einen Treffer hat ,

    Hallo

    Versuch mal wie beschrieben ein anderes Image. Falls das nicht hilft poste mal das Boot-Log.

    Habs auch nit einem anderen Image Probiert.....selber fehler.
    hier mein Log:

    ,debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID http://Hallenberg.com
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    debug: autoboot aborted from terminal
    dbox2:root>
    dbox2:root> seteth
    ethaddr 0x1001ffe3
    ethaddr: 00:50:9c:1d:50:e8
    dbox2:root>
    dbox2:root> boot net net net net net net net net net net
    debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.202
    debug: Sending TFTP-request for file D/dboxifa_tmp/tftpboot/u-boot
    will verify ELF image, start= 0x800000, size= 140008
    verify sig: 262
    boot net: boot file has no valid signature
    Branching to 0x40000


    U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.0.100; our IP address is 192.168.0.202
    Filename 'D/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.0.100; our IP address is 192.168.0.202
    Filename 'logo-lcd'.
    Load address: 0x100000
    Loading: *##
    done
    Bytes transferred = 7680 (1e00 hex)
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.0.100; our IP address is 192.168.0.202
    Filename 'D/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.0.100; our IP address is 192.168.0.202
    Filename 'logo-fb'.
    Load address: 0x100000
    Loading: *####################################
    done
    Bytes transferred = 179877 (2bea5 hex)

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 1 0

    Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

    Size: 8192 kB in 71 Sectors
    Sector Start Addresses:
    10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO)
    10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO)
    10020000 (RO) 10040000 (RO) 10060000 (RO) 10080000 (RO)
    100A0000 (RO) 100C0000 (RO) 100E0000 (RO) 10100000 (RO)
    10120000 (RO) 10140000 (RO) 10160000 (RO) 10180000 (RO)
    101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO)
    10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO)
    102A0000 (RO) 102C0000 (RO) 102E0000 (RO) 10300000 (RO)
    10320000 (RO) 10340000 (RO) 10360000 (RO) 10380000 (RO)
    103A0000 (RO) 103C0000 (RO) 103E0000 (RO) 10400000 (RO)
    10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO)
    104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO)
    10520000 (RO) 10540000 (RO) 10560000 (RO) 10580000 (RO)
    105A0000 (RO) 105C0000 (RO) 105E0000 (RO) 10600000 (RO)
    10620000 (RO) 10640000 (RO) 10660000 (RO) 10680000 (RO)
    106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO)
    10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO)
    107A0000 (RO) 107C0000 (RO) 107E0000 (RO)
    Using SCC ETHERNET device
    TFTP from server 192.168.0.100; our IP address is 192.168.0.202
    Filename 'kernel-yadd'.
    Load address: 0x100000
    Loading: *#################################################################
    #################################################################
    ##
    done
    Bytes transferred = 675073 (a4d01 hex)
    ............................................................... done
    Un-Protected 63 sectors
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 675009 Bytes = 659.2 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Starting pid 11, console /dev/console: '/etc/init.d/rcS'


    dbox2 - ImageFlashingAssistent

    - Hallenberg.com -


    Verifziere Daten: 4736k von 8064k (58%)Der Inhalt des Flashs stimmt nicht mit dem geflashten Image
    Sie koennen die dbox jetzt ausschalten.


    Please press Enter to activate this console.
    ------ Zusatzinformationen ------
    Gewählter Netzwerkadapter: ULi PCI Fast Ethernet Controller - Paketplaner-Miniport (1)
    IP-Adresse des Netzwerkadapters: 192.168.0.100
    IP-Adresse die die dbox bekommt: 192.168.0.202
    Comport: Kommunikationsanschluss (COM1)
    Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    CPU 1: AMD Athlon(tm) 64 Processor 3500+ @ 2200 MHz
    Dateiname des Images: STB-v40_2x_Final.img
    Imagetyp: Zwei Flashs
    DBOX-IFA Version: 2.3
    ------ Powered by http://www.dboxservice-hallenberg.de ------

    Und hier nocj mein Bootlog:


    init started: BusyBox v1.7.2 (2007-12-16 13:00:40 CET)
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Detected STB:
    Vendor: Nokia
    Model: D-BOX2
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    .debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-fd.97.1b.07.00.00-35
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0036

    will verify ELF image, start= 0x800000, size= 162960
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.2.0 (Tuxbox) (Dec 16 2007 - 15:07:04)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ....... done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    ### FS load complete: 694137 bytes loaded to 0x100000
    ............................................................... done
    Un-Protected 63 sectors
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 694073 Bytes = 677.8 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.35.3-dbox2 (mdimage@mdimage-mdteam) (gcc version 3.4.6) #2 So
    Dez 16 15:05:51 CET 2007
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    squashfs: version 3.0 (2006/03/15) Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1d:50:e8
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00420000 : "root (SquashFS)"
    0x00420000-0x007e0000 : "var (JFFS2)"
    0x007e0000-0x00800000 : "FLFS (U-Boot)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    init started: BusyBox v1.7.2 (2007-12-16 13:00:40 CET)
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Detected STB:
    Vendor: Nokia
    Model: D-BOX2
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
    avia_av_core: Starting avia_av_wdt thread.
    avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
    avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
    avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
    avia_gt_core: autodetecting chip type... GTX
    avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
    avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
    avia_gt_core: masking unhandled irq reg 1 bit 11
    avia_gt_core: masking unhandled irq reg 1 bit 13
    avia_gt_ucode: loaded ucode v0014
    avia_gt_ucode: ucode section filters disabled.
    avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
    avia_gt_core: masking unhandled irq reg 0 bit 6
    avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
    avia_gt_pcm_set_rate(44100)
    avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
    avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
    avia_gt_core: Loaded AViA eNX/GTX driver
    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    Console: switching to colour frame buffer device 82x32
    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
    avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
    avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
    avia_gt_pcm_set_rate(44100)
    avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
    DVB: VES1820(0): pwm=0x48
    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
    avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
    avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

    Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
    mv: cannot rename '/lib/tuxbox/plugins/mdextra.cfg': No such file or directory
    cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

    $Id: sectionsd.cpp,v 1.255 2007/12/16 11:53:31 seife Exp $
    [sectionsd] Caching max 5000 events
    [sectionsd] Caching 14 days
    [sectionsd] Caching 6 hours Extended Text
    [sectionsd] Events are old 60min after their end time
    /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
    /var/tuxbox/config/mybouquets.xml: No such file or directory
    $Id: zapit.cpp,v 1.404 2007/17/09 09:53:04 seife Exp $
    [frontend] uncommitted_switch_mode 0
    avia_gt_core: masking unhandled irq reg 0 bit 7
    /tmp/currentservices.xml: No such file or directory
    $Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

    [controld] Boxtype detected: (1, Nokia D-BOX2)
    [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
    [yhttpd] Webserver nhttpd/3.1.6 (yhttpd_core/1.2.0)
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
    [LCDFONT] Intializing font cache...
    [yhttpd] Webserver starting...
    [camd2] ca system id: 1722
    rm: cannot remove '/var/etc/.sectionsd': No such file or directory
    neutrino: /lib/libpng12.so.0: no version information available (required by neut
    rino)
    Segmentation fault
    zapit shot down :)
    Waiting for controld (max. 9 seconds)
    Waiting for controld (max. 8 seconds)
    Waiting for controld (max. 7 seconds)
    Waiting for controld (max. 6 seconds)
    Waiting for controld (max. 5 seconds)
    Waiting for controld (max. 4 seconds)
    Waiting for controld (max. 3 seconds)
    Waiting for controld (max. 2 seconds)
    Waiting for controld (max. 1 seconds)
    CXA2092 found
    umount: cannot umount /var: Device or resource busy
    The system is going down NOW!
    Sending SIGTERM to all processes
    [yhttpd] !!! SIGNAL !!! :15!
    [yhttpd] No special SIGNAL-Handler:15!
    [yhttpd] stop requested......
    Sending SIGKILL to all processes
    Requesting system halt


    hat jemand eine Idee???

    [color="White"]sieht ganz so aus als ob die Box nicht vom *Netzwerk*gebootet hat, solltest nochmals ganz genau in die *FAQ* schauen![/color]

    Das obere log ist einfach das was die box ausgibt wenn sie ganz nomal hochfährt.

    hab jetzt zum test die box vom nachbarn geflasht.....keine probs.

    Auszug aus deinem Boot-Log
    "Segmentation fault" = Zugriffsverletzung
    Wird verursacht,wenn ein Programm/Betriebssystem versucht in ein "nur lesen" Bereich zu schreiben!
    Da der Rest vom Log soweit gut aussieht wird`s wohl an der Software liegen. -> Neues Image !!

    Auszug aus dem Flash-Log
    "boot net: boot file has no valid signature"

    Nimm den D-Box Bootmanager

    Box verbinden Crossover + Nullmodemkabel
    Image Flashen auswählen
    Box mit Power und Kanal rauf Taste reseten (gleichzeitig drücken bis das Display aus geht)
    danch nur die Power Taste los lassen Kanal rauf noch 2-3 sek halten
    im Comterminal des Bootmanagers sieht man jetz den Bootvorgang, Hardwarecheck etc.
    wenn der Check beendet ist - an der Konsole " boot net " eingeben
    und Spass haben

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!

Benutzerkonto erstellen Anmelden