Zee + D09 + Oscam

Hallo, hab hier eine D09 Karte die ich nicht zum Laufen bekomme. Bekomme Ständig folgende Meldung:

(dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1834 PROVID 000000 ECMPID 03E6 ANY CHID PMTPID 006A VPID 03DF
(ecm) dvbapi (1834@000000/0000/CF72/89:2075xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxE004): not found (2 ms) by D09

Sind irgendwelche einstellungen fehlerhaft ?

Was ich nutze:
Coolstream Zee
Neutrino-Image 3.40
D09 Internationale Kanäle im Slot 1
Oscam 1.20

Die Karte soll auch automatisch Aktualisiert werden

oscam.conf

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log
maxlogsize = 256


[webif]
HttpPort = 3001
HttpUser = xxx
HttpPWD = xxx
httptpl = /var/tuxbox/config/
httpcss = /var/tuxbox/config/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 1


[dvbapi]
Enabled = 1
Boxtype = coolstream
User = dvbapi
decodeforever = 1
AU = 1

oscan.dvbapi

P:1834

oscam.server

[reader]
Label = D09
Protocol = internal
Device = 0
cardmhz = 368
Detect = CD
rsakey = 8A......11
boxkey = 66.....7B
Group = 1
CAID = 1834
EMMCache = 1,1,2

oscam.user

[account]
enable = 1
User = dvbapi
pwd = dvbapi
AU = 1
Group = 1

Keine Einträge in:
oscam.services
oscam.srvid

LOG

Zitat

• 2018/03/24 13:30:51 00000000 s (main) System name = Linux
• 2018/03/24 13:30:51 00000000 s (main) Host name = NI-FLASH-000F57
• 2018/03/24 13:30:51 00000000 s (main) Release = 2.6.34.13-nevis
• 2018/03/24 13:30:51 00000000 s (main) Version = #1 Sat Jun 24 19:32:15 CEST 2017
• 2018/03/24 13:30:51 00000000 s (main) Machine = armv6l
• 2018/03/24 13:30:51 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1540
• 2018/03/24 13:30:51 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2018/03/24 13:30:51 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/03/24 13:30:51 00000000 s (main) signal handling initialized
• 2018/03/24 13:30:51 00000000 s (reader) D09 [internal] creating thread for device 0
• 2018/03/24 13:30:51 00000000 s (main) waiting for local card init
• 2018/03/24 13:30:51 XXXXXXX r (reader) D09 [internal] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=368)
• 2018/03/24 13:30:51 XXXXXXX r (reader) D09 [internal] Reader sci internal, detected box type: generic
• 2018/03/24 13:30:51 XXXXXXX r (reader) D09 [internal] card detected
• 2018/03/24 13:30:51 XXXXXXX h (webif) webif: decompressed 162017 bytes back into 385816 bytes
• 2018/03/24 13:30:51 XXXXXXX h (webif) HTTP Server running. ip=0.0.0.0 port=3001
• 2018/03/24 13:30:58 XXXXXXX r (reader) D09 [internal] ATR: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
• 2018/03/24 13:30:58 XXXXXXX r (reader) D09 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2018/03/24 13:30:58 XXXXXXX r (reader) D09 [internal] Calculated work ETU is 93.00 us reader mhz = 600
• 2018/03/24 13:31:00 XXXXXXX r (reader) D09 [internal] Driver Settings: Convention=Direct, Protocol=T14, FI=1, F=620, N=0, DI=1, D=1, PI1=5, PI2=0, II=50, TXRetries=0, RXRetries=0, FilterProtocolBytes=0
• 2018/03/24 13:31:00 XXXXXXX r (reader) D09 [internal] Driver Timeouts: CardActTime=45004, CardDeactTime=38897, ATRSTime=65535, ATRDTime=19200, BLKTime=0, CHTime=0, CHGuardTime=0, BKGuardTime=4
• 2018/03/24 13:31:00 XXXXXXX r (reader) D09 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
• 2018/03/24 13:31:01 XXXXXXX r (reader) D09 [internal] detect irdeto tunneled nagra card
• 2018/03/24 13:31:01 XXXXXXX r (reader) D09 [internal] rsa key configured -> using nagra mode
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [internal] ready for requests
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [internal] found card system nagra
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] ROM: A B C D E 1 2 3
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] REV: A B C D 0 0
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] SER: ############
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] CAID: 1834
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] Prv.ID: 00 00 04 01 (sysid)
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] Prv.ID: 00 00 00 00
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] IRD ID: ############
• 2018/03/24 13:31:04 XXXXXXX r (reader) D09 [nagra] active to: 2018/05/15 04:00
• 2018/03/24 13:31:05 00000000 s (main) init for all local cards done
• 2018/03/24 13:31:05 XXXXXXX c (client) plain dvbapi-client granted (dvbapi, au=auto (2 reader))
• 2018/03/24 13:31:05 XXXXXXX c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
• 2018/03/24 13:31:05 XXXXXXX c (dvbapi) Detected Coolstream API
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1834 ECM_PID: 0288 PROVID: 000000
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 0289 PROVID: 000000
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1722 ECM_PID: 0287 PROVID: 000000
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1861 ECM_PID: 0285 PROVID: 000000
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09FD ECM_PID: 0280 PROVID: 000000
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 found 5 ECMpids and 3 STREAMpids in caPMT
• 2018/03/24 13:31:07 XXXXXXX c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1834 PROVID 000000 ECMPID 0288 ANY CHID PMTPID 0069 VPID 0281
• 2018/03/24 13:31:08 XXXXXXX c (ecm) dvbapi (1834@000000/0000/CFD4/89:26xxxxxxxxxxxxxxxxxxxxxxxxxxxxxE): not found (564 ms) by D09
• 2018/03/24 13:31:08 XXXXXXX c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
• 2018/03/24 13:31:08 XXXXXXX c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1834 PROVID 000000 ECMPID 0288 ANY CHID PMTPID 0069 VPID 0281
• 2018/03/24 13:31:08 XXXXXXX c (ecm) dvbapi (1834@000000/0000/CFD4/89:26xxxxxxxxxxxxxxxxxxxxxxxxxxxx2E): not found (163 ms) by D09
• 2018/03/24 13:31:08 XXXXXXX c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
• 2018/03/24 13:31:08 XXXXXXX c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1834 PROVID 000000 ECMPID 0288 ANY CHID PMTPID 0069 VPID 0281
• 2018/03/24 13:31:09 XXXXXXX c (ecm) dvbapi (1834@000000/0000/CFD4/89:26xxxxxxxxxxxxxxxxxxxxxxxxxxxx2E): not found (1 ms) by D09
• 2018/03/24 13:31:09 XXXXXXX c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
• 2018/03/24 13:31:09 XXXXXXX c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1834 PROVID 000000 ECMPID 0288 ANY CHID PMTPID 0069 VPID 0281

Hey, ja die Daten habe ich mit Absicht geändert, weil ich nicht wusste ob man die öffentlich zeigen darf/sollte. Ich hab leider nichts anders getestet. Wäre aber dankbar wenn ihr mir sagen könnt welche Softcam ich am besten nutzen sollte, der aber auch die Karte Updaten lässt. Zudem soll er auch auf einem RPi mit Oscam zugreifen können.