Beiträge von mandy28

erbesserungen in der Version xx.05.01-19469


    * DECT: NEU - Sicherer DECT-Repeating Modus für die FRITZ!Box
    * DECT: NEU - Anzeige von RSS-Feeds mit darin enthaltenen Bildern im FRITZ!Fon MT-F und C3*
    * DECT: NEU - mit FRITZ!Fon C3 und MT-F eigene MP3-Klingeltöne nutzen
    * DECT: Beschleunigung der Menüs und Listendarstellung, verbessertes Handling von Telefonbuch, Anruflisten und Anrufbeantworter im FRITZ!Fon C3, MT-F und MT-D*
    * Internet: NEU - Kindersicherung mit Filtern für Internetseiten und -anwendungen
    * Internet: NEU - Unterstützung DS-Lite für Verbindungen zu IPv4-Gegenstellen über native IPv6-Zugänge
    * Internet: Automatische Einrichtung durch den Anbieter via TR-069 erweitert auf IPv6-Verbindungen
    * Internet: IPv6 - Neues Tunnelprotokoll RFC 5969: IPv6 Rapid Deployment on IPv4 Infrastructures (6rd)
    * Internet: IPv6 - Workaround: Windows 7 akzeptiert bis zum Reboot nicht mehr den gleichen Prefix, wenn dieser einmalig invalidiert wurde
    * Internet: Unterstützung von VPN-Verbindungen zu Microsoft TMG-Server
    * Internet: Sporadisch gehäufte DynamicDNS-Aktualisierungen beseitigt
    * System: NEU - Einstellungen selektiv übernehmen, auch von älteren FRITZ!Box-Modellen und ausgewählten Speedport-Geräten
    * System: NEU - Anzeige laufender Telefonate oder aktueller Netzwerkaktivitäten auf der Startseite
    * Telefonie: Öffnen empfangener Faxe oder Sprachnachrichten aus der Anrufliste
    * Speicher (NAS): NEU - Suchen, Sortieren und erweiterte Ansicht nach Kategorien für FRITZ!NAS
    * Speicher (NAS): NEU - Mediaserver und Speicherfreigabe (smb) können umbenannt werden
    * Speicher (NAS): NEU - Medienfreigabe auf ausgewählten USB-Speicher begrenzbar (UPnP-AV)
    * Speicher (NAS): NEU - Medienfreigabe auf ausgewählte USB-Speicher-Partition begrenzbar (UPnP-AV)
    * Speicher (NAS): NEU -Getrennte Kennwortvergaben für Speicherfreigaben im Heimnetz und Internet
    * Speicher (NAS): NEU - Anzeige der FRITZ!Box Speicher in der Windows Netzwerkumgebung (smb share announcement)
    * Speicher (NAS): FRITZ!NAS Fernzugriff über https://box-ip/nas deutlich vereinfacht
    * Speicher (NAS): Komplett überarbeiteter UPnP-AV Mediaserver 4.0 


* FRITZ!Fon: Aktualisieren Sie auch die Firmware für Ihr FRITZ!Fon C3, MT-F oder MT-D, um alle neuen Leistungsmerkmale nutzen zu können.

Verbesserungen in der Version xx.05.01-19469


    * Telefonie: gelegentliches Stottern des Anrufbeantworters bei gleichzeitigem GUI-Zugriff beseitigt
    * Telefonie/Startseite: Zähler für heutige Anrufe korrigiert und sporadisches Fehlen von Anrufen in der Anrufliste beseitigt
    * Speicher (NAS): NEU - Medienfreigabe auf ausgewählte USB-Speicher-Partition begrenzbar (UPnP-AV)
    * Speicher (NAS): Anzeige der Inhaltsübersichten mit Bildern beschleunigt
    * Speicher (NAS): Unterstützung für XBOX erweitert für Fotos, Filme und Musik (Alben und Songs)
    * Speicher (NAS): Probleme mit dem Onlinespeicher beseitigt
    * System: Absturz beim Firmware-Update beseitigt
    * WLAN: nach einigen Stunden/Tage Laufzeit auftretende Anmeldeprobleme beseitigt
    * WLAN: Anmeldung des Intel4965 mit falscher Datenrate korrigiert

root@fritz:/# invoke-rc.d apache2 start
Starting web server: apache2(125)Address already in use: make_sock: could not bind to address 127.0.0.1:16011
no listening sockets available, shutting down
Unable to open logs
 failed!
invoke-rc.d: initscript apache2, action "start" failed.
root@fritz:/# 
root@fritz:/# invoke-rc.d apache2 stop
Stopping web server: apache2
.
root@fritz:/# 
root@fritz:/# invoke-rc.d apache2 start
Starting web server: apache2
(125)Address already in use: make_sock: could not bind to address 127.0.0.1:16011
no listening sockets available, shutting down
Unable to open logs
 failed!
invoke-rc.d: initscript apache2, action "start" failed.
root@fritz:/#

# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz


#NameVirtualHost *:16011
Listen 127.0.0.1:16011


<IfModule mod_ssl.c>
    # SSL name based virtual hosts are not yet supported, therefore no
    # NameVirtualHost statement here
    Listen 443
</IfModule>

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#


### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#


#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"


#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>


#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}


#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300


#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On


#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100


#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15


##
## Server-Pool Size Regulation (MPM specific)
## 


# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
    StartServers          5
    MinSpareServers       5
    MaxSpareServers      10
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>


# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
    StartServers          2
    MaxClients          150
    MinSpareThreads      25
    MaxSpareThreads      75 
    ThreadsPerChild      25
    MaxRequestsPerChild   0
</IfModule>


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}


#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#


AccessFileName .htaccess


#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>


#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain




#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off


# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log


#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn


# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf


# Include all the user configurations:
Include /etc/apache2/httpd.conf


# Include ports listing
Include /etc/apache2/ports.conf


#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent


#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined


#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#


#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use 
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.


#    Alias /error/ "/usr/share/apache2/error/"
#
#    <Directory "/usr/share/apache2/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en cs de es fr it nl sv pt-br ro
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var






# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.


# Include generic snippets of statements
Include /etc/apache2/conf.d/


# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/