Hallo zusammen,
neue Firmware für Galaxis raus hier die neuerungen:
======================================================================
E a s y R i d e r powered by >>>>> http://www.easyrider.ch.pn <<<<<
======================================================================
+ embedded gCam
+ multicam support (betacrypt, cryptoworks, conax)
+ card sharing via gbox-SSSP
+ pcmcia compactflash support
======================================================================
This version is not for public, it is an internal beta version and
contains bugs. You can use it for testing and give it to friends of
your confidence, but don't put this version on various upload centers
and don't discuss on public boards.
DISCLAIMER
======================================================================
This software is for educational purposes only.
It shouldn't be used to ilegally watch TV channels.
======================================================================
Hardware Requirements
=====================
Galaxis McZap, Matrix, IQs, Matrix Action, Easy, Pop, Hirschmann,
Axis, Classic, TechnoTrend TT-micro S200, Premiere TV-Pilot 100,
hauppauge dec 3000s or any compatible receiver with TI AV 711xx.
Installation
============
+ Flash Erase (*)
+ Keyfile
+ Settings (*)
+ Firmware
(*) In case of first install via rs232 save settings and erase flash.
For flash erase, saving settings and bootloader have a look at
google and search for "pl_galaxis".
Version 3.0 or higher supports fast simple Firmware- and Settings-
flashing via compactflash-card.
Cardsharing
===========
EasyRider can be used in emulation- or share-mode via SSSP (=Simple
Serial Sharing Protocol). This Protocol defines the communication
between dvb-box and a gbox by using RS232 (serial/com/tty port).
For cardsharing activate "cw-share" in the tools menu of the firmware.
When configuring cw-share take care in using debug-mode. Only use in
case of searching errors to avoid redundant datatransfer on rs232 port.
serial port configuration for e.g. router like WR850G V2
--------------------------------------------------------
115200 8N1 (baudrate: 115200, data bits: 8, parity: none, stop bit: 1)
gbox-RS232 communication settings
---------------------------------
To activate add in the gbox_cfg
R: { 01 } for com1, or R: { 02 } for com2
W: and V: should be deactivated 00 00
EMULATIONS
==========
+ irdeto
+ beta digital
+ seca
+ viaccess, tps
+ nagravision
+ cryptoworks
+ constant cw
+ biss
+ conax
ECM-Tracer (caid/pid logger)
============================
EasyRider contains also an ecm-tracer (CaID/PID Logger).
To start tracing activate the ecm-trace and for additional information
also the debug-mode in the tools menu.
EMM-Blocker
===========
The integrated emm-blocker can be activated in the tools menu.
D0, D2 and D3's will be blocked.
THX2@LL
=======
thanks to all for patience, spending time for tests, cooperation work
and nerves.
thanks also to the developers of external tools and gbox through which
cardsharing with galaxis compatible dvb-boxes has become possible.
VERSION-HISTORY
======================================================================
3.17
----
+ RC5 support bugfix
+ alpha display driver
+ polsat back again (reset your keys with FF FF FF FF ....)
=======================================================