nachdem anschalten bleibt die box bei 4 balken stehen und der 5te kommt erst nach mehreren sek. danach passiert garnix mehr. es ist linux drauf mit glj image.
kann man da noch was machen???
D Box bootet nicht
-
odinsrache -
5. März 2008 um 16:17
-
-
Neu flashen mit Hallenberg Flash Assi.
Aber nimm ein neues Image keine Sicherung. -
hab ich schon probiert, geht aber auch nicht da die box nicht durchläuft nachdem einstecken. bleibt dann immer bei der meldung dbox.prompt oder so ähnlich stehen
-
Zitat von odinsrache;193676
hab ich schon probiert, geht aber auch nicht da die box nicht durchläuft nachdem einstecken. bleibt dann immer bei der meldung dbox.prompt oder so ähnlich stehen
mach malein bootlog und schiebs hierrein
-
ldebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: SiS 900-basierte PCI-Fast Ethernet-Adapter - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.101
IP-Adresse die die dbox bekommt: 192.168.0.202
Comport: Prolific USB-to-Serial Comm Port (COM2)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Sempron(tm) 2800+ @ 2000 MHz
Dateiname des Images: GLJ31507 2X Kabel modifiziert für NOKIA.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------ -
Zitat von odinsrache;193676
hab ich schon probiert, geht aber auch nicht da die box nicht durchläuft nachdem einstecken. bleibt dann immer bei der meldung dbox.prompt oder so ähnlich stehen
Wie jetzt???
Hast du nun ein neues Image erfolgreich flashen können oder nicht?
Was heißt "da die box nicht durchläuft", das hat mit flashen nix zu tun, dafür muss sie ja nicht mit dem alten Image "durchlaufen".Wenn flashen mit Hallenberg nicht geht dann nimm den Bootmanager - ich bin sowieso ein erklärter Gegner vom Hallenberg...
-
der hallenberg läuft immer bis zur meldung dbox2: root dann kommt nix mehr also kann ich das image auch nicht flashen. bootmanager kenn ich nicht bzw. weiss nicht wie es damit geht
-
Ich würd sagen installier dir den mal und schaus dir an, eigentlich gibts nicht viel zu wissen, ist großteils selbsterklärend, wenn was unklar ist, reden wir weiter.
-
installiert ist der bootmanager aber wie bekomme ich damit ein neues image auf die box???
-
wenn ich mit dem bootmanager auslesen will komme ich auch nicht weiter bleibt genau an der selben stelle hängen!!
-
Auslesen hat seine Tücken (prinzipiell mit dem Bootmanager), nur wenn die Box nicht hinüber ist, dann zumindest das Image, also auslesen wird wohl jetzt nicht mehr das wichtigste sein.
Flashen: Utilities -> Image flashen
Und wenn sie hängen bleibt dann poste nochmal das Log vom Bootmanager - gibt da nämlich so eine Sache mit dem Netzwerk, wenn man die nicht beachtet dann bleibt der Bootmanager prinzipiell hängen.
-
meinte ich eigentlich auch ein Log vom Bootmanager, wußte net dass Du nicht den Bootmanager benutzt.
-
Zitat von odinsrache;193761
ldebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: SiS 900-basierte PCI-Fast Ethernet-Adapter - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.101
IP-Adresse die die dbox bekommt: 192.168.0.202
Comport: Prolific USB-to-Serial Comm Port (COM2)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Sempron(tm) 2800+ @ 2000 MHz
Dateiname des Images: GLJ31507 2X Kabel modifiziert für NOKIA.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------Ich bin zwar nicht der Dbox Crack, aber könnte es damit zusammen hängen?
Es gab ja immer Probleme mit den USB2Serial Adapter.
-
ich habe bisher aber noch nie probleme mit dem adapter gehabt ist bei dieser box das erste mal.
aber mit dem boot manager ist genau das gleiche wenn ich das neue image flashen will bleibt er auch bei dbox2:root hängen und tut nix mehr -
Hallo
Poste doch mal die Log`s vom Bootmanager - Boot-Log und Flash-Log.
Was Du da vom Hallenberger gepostet hast sagt leider nicht viel aus. -
ldebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-0f.03.43.07.00.00-45
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot flashFlash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNETOptions:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 650877 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 650813 Bytes = 635.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (GLJ-Team@DBOX2) (gcc version 3.4.4) #4 Sa Apr 21 21:
03:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30864k available (1104k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:41:c0:b5
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.03.23-17:15+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
cam.c,v 1.31 13th of May satsuse
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter - GLJ-Team (JohnDoe,g5401) (C-Cube AViA GTX/eNX wit
h AViA 500/600).
DVB: VES1820(0): pwm=0x48
DVB: registering frontend - http://glj.6x.to 0:0 (VES1820 based DVB-C frontend).
..
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $
avia_gt_proc: found - AVIA GTX
Please press Enter to activate this console. rm: cannot remove `/var/etc/.slot0_
start': No such file or directory
rm: cannot remove `/var/etc/.slot1_start': No such file or directory
rm: cannot remove `/var/etc/.slot_com': No such file or directory
rm: cannot remove `/var/etc/.slot_multi': No such file or directory
rm: cannot remove `/var/etc/.com_betad': No such file or directory
rm: cannot remove `/var/etc/.multi_betad': No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini, patched by GLJ-Team (JohnDoe
) Exp $
[zapit] PMT update enabled
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
/tmp/currentservices.xml: No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
cam.c,v 1.31 13th of May satsuse
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Camd3 Multicam-Treiber nicht geladen
Starte camd3
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[nhttpd] Neutrino HTTP-Server starting......Patched GLJ-Team (JohnDoe)
[LCDFONT] initializing core...[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 2500 events
[sectionsd] Caching 1 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
/tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
/tmp/neutrino)
ping: http://www.google.de: Host name lookup failure
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: flashupdate.currentdistribution
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
zap failed!
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out -
Hast Du dir das Image selber umbenannt, oder woher bzw. welches versuchst Du zu flashen?
ZitatImage Name: dbox2
-
Zitat von odinsrache;193848
ich habe bisher aber noch nie probleme mit dem adapter gehabt ist bei dieser box das erste mal.
sag niemals nieee
:hugging:
-
[QUOTE=odinsrache;193902]ldebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-0f.03.43.07.00.00-45
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot flashhallo
wenn bei dbox2:root>boot flash bleibt und nicht weiter geht dann gib doch einfach [color="Lime"]bootnet[/color] oder einfach [color="lime"]boot[/color] ein und dürfte dan weiter flashen...
wenn doch nicht gehen sollte dan ist es zu 100% netzwerk buchse von dbox teilweise ausgelötet gehause aufmachen board raus von der gehause und den netzwerkbuchse nach löten (das war auch mal bei mir der fall)
übriegens wann hast du den dbox2 zum letzten mal ein image geflasht oder hast du erst jetzt so wie er ist gekauft ?:biggrin:
MfG
elmedin007 -
Zitat von elmedin007;193977
[QUOTE=odinsrache;193902]ldebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-0f.03.43.07.00.00-45
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot flashhallo
wenn bei dbox2:root>boot flash bleibt und nicht weiter geht dann gib doch einfach [color="Lime"]bootnet[/color] oder einfach [color="lime"]boot[/color] ein und dürfte dan weiter flashen...
wenn doch nicht gehen sollte dan ist es zu 100% netzwerk buchse von dbox teilweise ausgelötet gehause aufmachen board raus von der gehause und den netzwerkbuchse nach löten (das war auch mal bei mir der fall)
übriegens wann hast du den dbox2 zum letzten mal ein image geflasht oder hast du erst jetzt so wie er ist gekauft ?:biggrin:
MfG
elmedin007nur hat er ja mit flashhasi geflasht und net mit bootmanager
@odinsrache hier mal etwas lesen :http://www.dietmar-h.net/flashprob.html
-
Jetzt mitmachen!
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!