Hallo die erste box die nicht so richtig will
es ist ne sagem 1xi habe sie mit der MHC methode in den debug mode gebracht...
allerdings flashen kann ich sie nicht...
könnt ihr mal nachsehn, ob ihr was findet?
Code
kdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044debug: Got Block #0048
will verify ELF image, start= 0x800000, size= 1267512
verify sig: 0
Branching to 0x409b8
------ Systeminformations ------
Selected networkdevice: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC - Paketplaner-Miniport (0)
IP-address of the networkdevice: 192.168.0.6
IP-address which the dbox gets: 192.168.0.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------