Gude !
Ich benötige dringend ein Image was 100% auch geht !
Wenn jemand also ein Image für die dbox2 Nokia 2xamd 500 16/16/8 Kabel am laufen hat wäre es super wenn er mir das zukommen lassen könnte .. oder link !
.... big THX
Gude !
Ich benötige dringend ein Image was 100% auch geht !
Wenn jemand also ein Image für die dbox2 Nokia 2xamd 500 16/16/8 Kabel am laufen hat wäre es super wenn er mir das zukommen lassen könnte .. oder link !
.... big THX
Hier gibt es so einige: http://ulc.zebradem.com/index.php?&dir…ges%20-%20Tools
ídebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.100.24, My IP 192.168.100.202
debug: Sending TFTP-request for file G/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.100.24; our IP address is 192.168.100.202
Filename 'G/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.100.24; our IP address is 192.168.100.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.100.24; our IP address is 192.168.100.202
Filename 'G/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.100.24; our IP address is 192.168.100.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Bank # 1: AMD 29DL323B (32M, bottom boot sect), 32 bit
Size: 8192 kB in 71 Sectors
Using SCC ETHERNET device
TFTP from server 192.168.100.24; our IP address is 192.168.100.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
dbox2 - ImageFlashingAssistent
- Hallenberg.com -
Wilkommen auf ihrer dbox2
Starte Backup....
Schreibe Backup: 8064k von 8064k (100%)
Backup abgeschlossen!
Der Flashprozess wird nun gestartet...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Flashen beendet!
Sie koennen die dbox jetzt ausschalten.
Please press Enter to activate this console.
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139/810x Family Fast Ethernet NIC - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.100.24
IP-Adresse die die dbox bekommt: 192.168.100.202
Comport: Kommunikationsanschluss (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 2.66GHz @ 2667 MHz
Dateiname des Images: Yadi21011_Kabel_2x_mtd4.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------
//////////////////////////////////////////////////////////////////////////
Das ist mal meine Logdatei beim flashen von dem image yaddy aus dem ULC.
werde es mal testen....
kann dir eins von PB raten wenn du auf Enigma stehst sehr gut und stabil online update usw.
PB-ENIGMA
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!