enigma2-2.6git20081221
New webinterface (from download server)
7 day epg from bskyb, skyitalia, nova gr, nrk, svt(viasat), tvprofil(rtl etc)
Mountmanager for cifs and nfs mount
Infobar date language options
Image ready for YouTubePlayer and VlcplayerExtended (from download server)
New addon download manager#########################################
IMPORTANT : WHEN INSTALLING IN FLASH
#########################################When the image boots (from flash) - select language and exit Wizard.
Check Main Menu - System - Network if you wish.Then give these telnet commands (please use cf or usb for hdd if appropriate) :-
Code1: init 4 2: killall -9 enigma2 3: mv /usr/lib/enigma2/python/Plugins/Extensions /media/hdd 4: mv /usr/lib/python2.5/site-packages /media/hdd 5: ln -sfn /media/hdd/Extensions /usr/lib/enigma2/python/Plugins/Extensions 6: ln -sfn /media/hdd/site-packages /usr/lib/python2.5/site-packages 7: init 3These commands will move the folders Extensions and site-packages to /media/hdd and make symlinks in their original locations. Please check that this has happened.
All plugins in future will go to hdd, cf or usb
Get back to the wizard by Main menu - system.
#########################################
IMPORTANT : BEFORE INSTALLING PLUGINS
#########################################The 3 items in the Software downloads (see list below)
are necessary for many plugins. Please install these
before installing any plugins.#########################################
Special shortcut :
Button 0 -> Extra Setup
Button yellow -> Single service epg#########################################
7 day epg :Based on plugin e2_loadepg. If a channel does not show epg, the reason will be given in
/media/hdd/e2_loadepg.log. The main reasons are - epg not available, channel is not selected for
epg, or the channel or provider name does not agree with that in lamedb. In that case please edit
the channellist.conf files in folder /usr/lib/enigma2/python/DF/e2_loadepg/dl_modules.
The format for a channel in the list is - id=n,channel name[,provider name] where :-
n=0 (channel NOT selected for epg); n=1 (selected)
channel name and provider name are the names of the channel and its provider in/etc/enigma2/lamedb. The provider name can be omitted if it is same as the Default Provider at
the top of the list. If no provider name in lamedb then use the word noprovider.
The epg days can be changed in the .conf files in the /dl_modules folder.
########################################EPG Vorgehensweise (alle Dateien und Verzeichnisse liegen in
/usr/lib/enigma2/python/DF/e2_loadepg/):-
(1) In e2_loadepg.conf - providername(n) anpassen in DOWNLOAD_MODULES= bskyb (Beispiel).
(2) In bskyb.conf (Beispiel) - MAX_DAY_EPG= anpassen der Tage fürs verfügbare Epg (von 1 bis 7,
für nova muss 7 eingestellt sein!).
(3) Danach auf der dreambox - Menü -> Extra Menu -> Update epg.
Dann das MenÜ verlassesn - das update des EPG kann einige Zeit dauern, endet aber mit einem
Enigma2 - Neustart.
(4) Wenn für ein Kanal (iin diesem Beispiel vom Provider bskyb) kein EPG vorhanden ist, kann man
in /media/hdd/e2_loadepg.log den Grund dafür nachlesen. Die Hauptursachen hierfür sind, wenn das
EPG nicht verfügbar ist, der Kanal ist nicht für das update ausgewählt, oder der
Kanal-/Providername stimmt nicht mit dem Eintrag in der lamdb überein. Für letzteres muss man die
bskyb-channellist.conf (in diesem Beispiel) in /e2_loadepg/dl_modules anpassen.
Das Format für einen Eintrag in dieser *.conf ist : id=n,channel name[,provider name]
wobei :-
n=0 (Kanal NICHT fürs EPG ausgewählt); n=1 (fürs EPG ausgewählt).
Kanal-/Providername sind die Namen des Kanals bzw. dessen Providers in /etc/enigma2/lamedb.
Der Providername kann ausgelassen werden, wenn er dem Default-Provider am Anfang der Liste
entspricht. Wenn in der in lamedb kein Providername steht dann muss noprovider eingetragen
werden.
########################################
Available from download server :-
software
python-pyopenssl_0.6-r0_powerpc.ipk
twisted-web_8.1.0-r0_powerpc.ipk
grab-0.8_powerpc.ipkemulators
mgcamd-1.30-newcs_1.50_powerpc.ipk
evocamd-1.17c-newcs_1.50_powerpc.ipk
CCcam-2.011_powerpc.ipkplugins
barryallen.v4.6.56_1_powerpc.ipk
webinterface.v2.6_1_powerpc.ipk
tuxtxt_0.1-r0_powerpc.ipk
mosaic.v1.0_r0_powerpc.ipk
cccaminfo.v1.0_1_powerpc.ipk
permanentclock_2_powerpc.ipk
mediacenter.v0.92_1_powerpc.ipk
dreamexplorer.v1.5_1_powerpc.ipk
vlcplayer-enigma2-testimage_1.0_powerpc.ipk
youtubeplayer-enigma2-testimage_1.0_powerpc.ipk
graphmultiepg_1_powerpc.ipk
epg2cf-enigma2-testimage_1.0_powerpc.ipk
epg2usb-enigma2-testimage_1.0_powerpc.ipk
enigma2-plugin-extensions-skintransp_0.4.0-r0_powerpc.ipkDownload addons procedure:
Button 0 -> Addonmanager -> Download addon -> Download updated panel -> select.
After install of Updated panel other items can be dowloaded.
Before starting softcam first time Restart dreambox.
Mount cifs and nfs:
First go to Button 0 -> extraSetup -> UserConf -> Edit command -> Press OK and edit command.
Next time you select Video button (for playback) or Red button (for recording) you get a choice
for dreambox hdd or cifs or nfs hdd.
Also as before :-
Emumanager and Scriptmanager
Addonmanager
Webinterface
Recording and streaming improved
Yuv enabledPicon
(1) Put the Enigma2 picon folder in '/media/cf/', or, '/media/usb/', or (2) make a new folder
'picon' with selected icons and put this folder in /usr/share/enigma2/
ftp userscripts to /etc/scripts.
Crond :-
Edit by ftp the crontab file (in /etc) as usual with time and command etc. Start Crond from setup
window and reboot. An example crontab is in the image which will create a folder cronresult in
/etc. Crond will run after future reboots until stopped.
Inadyn :-
Edit the file inadyn.conf in /etc with your inadyn info e.g. usrname, password, alias. The
example file is for the dyndns.org setup.
Telnet command > /usr/bin/inadyn --h for other options. Inadyn can be started and stopped fromthe setup window and will run after future reboots until stopped.
Also - view inadyn.log.
pmt.tmp :-
The image is set to include pmt.tmp in /tmp from start. If any emu start kills it, it can be
restarted from the setup window. Check pmt.tmp window.
Skins :-
Default Skin - Nemesis.GlassLine .
Streaming to pc:-
Streaming (both viewing and recording on pc hdd) to pc is possible with TuxvisionE2.
Special thanks to :-
Gutemine, Cassiopeia 2000, Hein Holz for advice and various patches, tunhj1 and LeoGR specially for testing, development suggestions, and of course elektronikfreak and other friends for suggestions.
All log files can be found in /tmp.
No emus or keys included.
> download <
Viel Spass beim testen.
cu