Guten Morgen! 
Wie auch damals schon auf meiner Dream 7020 habe ich NewCS nicht am laufen!
Bislang hatte ich in meinem CS Netz alles über CCcam am laufen ...
Nun habe ich einen Receiver im Heimnetz (Edison argus) dazu bekommen.
Da ich den mit einbinden will und es für den Edison leider kein CCcam-Support gibt muss ich wohl auf NewCS gehen....
Nun ist mir nur NewCS, da es ja ein reiner Kartenleser ist ....zu schade in meiner Server Box der Dream 800 ... da ich ja dann darüber nicht mehr schauen kann....
Jetzt habe ich das folgendermaßen verstanden:
Bitte korrigieren falls ich da falsch liege....
Es gibt ja per Online Update Addons wie Bspw. NewCS1.65/CCcam2.11
Wenn ich dieses installiert habe und die CCcam.conf und die NewCS.xml folgender Maßen abändere dann müsste ich doch mit der Box schauen können, sodass NewCS die Karte liest und ich übers cccam gucke und wie zu vor auch meine anderen clients ganz normal weiter versorge...
Somit könnte ich ja dann den Edison per newcamd zugreifen lassen aufs NewCS....
So nun erstmal meine NewCSxml, CCcamcfg
Ersteinmal ein Ausschnitt aus der CCcam cfg
Nur das was fett gemacht ist habe ich geändert...
# example:
#
#N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# add a newcamd card, give it an offset of 2 hops, in the share list
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#
# stealthy login on newcamd server:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
#
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
N: 127.0.0.1 30000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#N: 127.0.0.1 30001 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Nun die komplette NewCSxml
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="SCI">
<device>
<name>Lower</name>
<type>sci</type>
<!-- <mhz>600</mhz> -->
<node>/dev/sci0</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<!-- <irdeto-camkey>0000000000000000</irdeto-camkey> -->
<!-- <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> -->
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>30000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<!-- <mhz>600</mhz> -->
<node>/dev/sci1</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<!-- <irdeto-camkey>0000000000000000</irdeto-camkey> -->
<!-- <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> -->
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>30001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>2</emm>
<ecm>3</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>cccam</name>
<password>cccam</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
<user>
<name>edison</name>
<password>edison1</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
</newcamdserver>
Achja bevor ich es vergesse verwende eine S02 karte ...
Im NewCS telnet log.... sagt er mir sowas kann leider nur ausschnitte kopieren...
[ 01:06:36 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 01:06:36 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 01:06:36 ] [ Sci ] Opening device /dev/sci1
[ 01:06:36 ] [ Sci ] Could not open device /dev/sci1 [Might be in
r process?]
[ 01:06:36 ] [ Loader ] Reset failed ...
[ 01:06:36 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 01:06:36 ] [ Sci ] Closing
[ 01:07:42 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 01:07:42 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 01:07:42 ] [ Sci ] Opening device /dev/sci1
[ 01:07:42 ] [ Sci ] Could not open device /dev/sci1 [Mig
r process?]
[ 01:07:42 ] [ Loader ] Reset failed ...
[ 01:07:42 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 01:07:42 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 01:07:42 ] [ Sci ] Opening de
Ich würde mich sehr freuen wenn mir jemand weiterhelfen könnte ....
Ich denke wir fangen alle mal klein an....
Danke im Vorraus
Gruß Dr.Quack