D-Box 2 Bootet nicht durch

    Ich habe hier ein merkwürdiges Problem. Hat da einer von euch eine Idee ?

    Also es ist eine Nokia D-Box 2 2xIntel. Sie lässt sich Flaschen alles. Wenn ich sie einschalte ist alles wie immer und sie beginnt zu Booten. Dann so beim Halben Bootvorgang bleibt sie hängen und der display wird dunkel. Sie ist aber via Netztwerk ansprechbar. Drücke ich aber eine Taste an der Fernbedienung macht sie dierekt einen Neustart.

    Die letzten paar Zeilen vom Log sehen so aus

    $Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
    [sectionsd] Caching max 2500 events
    [sectionsd] Caching 1 days
    [sectionsd] Events are old 60min after their end time
    /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
    /var/tuxbox/config/mybouquets.xml: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    /tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
    /tmp/neutrino)
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [neutrino] frameBuffer Instance created
    /dev/fb/0: No such file or directory
    framebuffer not available.
    FBIOPUT_VSCREENINFO: Bad file descriptor
    FBIOGET_FSCREENINFO: Bad file descriptor
    [sectionsd] getUTC: open: No such file or directory
    [neutrino] Error while setting framebuffer mode
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    zapit shot down :)
    Waiting for controld (max. 9 seconds)
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 8 seconds)
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    lastChannelRadio2: 4
    lastChannelTV2: 418
    Waiting for controld (max. 7 seconds)
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 6 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 5 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 4 seconds)
    [sectionsd] getUTC: open: No such file or directory
    ping: Yahoo! Host name lookup failure
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 3 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 2 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 1 seconds)
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    CXA2092 found
    The system is going down NOW !!
    Sending SIGTERM to all processe[nhttpd] stop requested......
    Sending SIGKILL to all processes.
    Requesting system halt.

    Ich bin kein Profi, habe aber den verdacht das eventuell der halbe Speicher futsch ist , oder habt ihr eine idee ?

    Mit was bzw. wie hast Du geflasht? Über Temp oder ?
    Hast Du versucht in dem zu flashenden Image etwas zu ändern vor dem flashen?
    Er zeigt ja [neutrino] Error while setting framebuffer mode an.

    Könnte es auch sein, dass Du das Image vorheentpackt hattest?

    versuch mal mit dem Hallenberg zu Flaschen. lad ein Image nochmal neu Runter, also alles von vorne. Wobei der Log eher nach einem Hardware Defekt ausschaut, ich Tippe auf den Avia Chip.

    So. Mal das letzte Zebradem gesaug. Meine Philips Box drann und Geflasht und läuft.

    Wider die Nokia rann.....selbes Spiel. Mir kommen diese Meldungen beim Booten komisch vor "No such file or directory" vieleicht doch ein Speicher defekt ?

    Ferndiagnosen sind immer schei**e.

    Interessant ist, würde ich sagen, was vor:
    $Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
    passiert, weil ab hier:
    [sectionsd] open dmx: No such file or directory
    nix mehr geht.

    Vieleicht mal den ganzen Log?

    PS: werden alle sectoren vor dem flashen gelöscht?

    Ok, hier mal der Gesammte Bootlog

    Linux version 2.4.34-dbox2 (GLJ-Team@DBOX2) (gcc version 3.4.4) #4 Sa Apr 21 21:
    03:42 CEST 2007
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
    Decrementer Frequency = 251625000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.76 BogoMIPS
    Memory: 30864k available (1104k kernel code, 340k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:e5:67
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 5 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "FLFS (U-Boot)"
    0x00040000-0x00800000 : "var (JFFS2)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (jffs2 filesystem).
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    init started: BusyBox v1.2.1 (2007.03.23-16:52+0000) multi-call event: $Id: eve
    nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    Detected STB:
    Vendor: Nokia
    Model: D-BOX2
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    ves1x93: Detected ves1893a rev2
    DVB: registering frontend 0:0 (VES1893)...
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
    avia_av_core: Starting avia_av_wdt thread.
    avia_av: timeout waiting for decoder init to complete. (00000001)
    insmod: init_module: avia_av: Input/output error
    insmod: unresolved symbol avia_av_set_stc
    insmod: unresolved symbol avia_gt_gv_copyarea
    insmod: unresolved symbol avia_gt_gv_show
    insmod: unresolved symbol avia_gt_gv_get_clut
    insmod: unresolved symbol avia_gt_gv_get_blevel
    insmod: unresolved symbol avia_gt_gv_set_input_size
    insmod: unresolved symbol avia_gt_gv_set_pos
    insmod: unresolved symbol avia_gt_gv_hide
    insmod: unresolved symbol avia_gt_get_info
    insmod: unresolved symbol avia_gt_gv_set_size
    insmod: unresolved symbol avia_gt_gv_set_input_mode
    insmod: unresolved symbol avia_gt_gv_set_clut
    insmod: unresolved symbol avia_gt_gv_set_blevel
    insmod: unresolved symbol avia_gt_gv_get_info
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    insmod: unresolved symbol avia_gt_ir_exit
    insmod: unresolved symbol avia_gt_ir_receive_pulse
    insmod: unresolved symbol avia_gt_ir_receive_data
    insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position
    insmod: unresolved symbol avia_gt_ir_send_buffer
    insmod: unresolved symbol avia_gt_ir_queue_pulse
    insmod: unresolved symbol avia_gt_ir_init
    insmod: unresolved symbol avia_gt_ir_set_duty_cycle
    insmod: unresolved symbol avia_gt_ir_set_frequency
    insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position
    insmod: unresolved symbol avia_av_set_sample_rate
    insmod: unresolved symbol avia_gt_pcm_play_buffer
    insmod: unresolved symbol avia_gt_pcm_stop
    insmod: unresolved symbol avia_gt_pcm_set_signed
    insmod: unresolved symbol avia_gt_pcm_set_endian
    insmod: unresolved symbol avia_gt_pcm_set_rate
    insmod: unresolved symbol avia_gt_pcm_set_width
    insmod: unresolved symbol avia_gt_pcm_poll
    insmod: unresolved symbol avia_gt_pcm_set_channels
    insmod: unresolved symbol avia_av_get_sample_rate
    insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
    insmod: unresolved symbol avia_gt_pcm_get_block_size
    insmod: unresolved symbol avia_gt_pig_show
    insmod: unresolved symbol avia_gt_pig_set_stack
    insmod: unresolved symbol avia_gt_pig_set_size
    insmod: unresolved symbol avia_gt_pig_set_pos
    insmod: unresolved symbol avia_gt_pig_hide
    insmod: unresolved symbol avia_av_stream_type_set
    insmod: unresolved symbol avia_av_register_video_event_handler
    insmod: unresolved symbol avia_av_set_audio_attenuation
    insmod: unresolved symbol avia_av_write
    insmod: unresolved symbol avia_av_pid_set
    insmod: unresolved symbol avia_av_audio_pts_to_stc
    insmod: unresolved symbol avia_gt_dmx_queue_write
    insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
    insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
    insmod: unresolved symbol avia_av_play_state_set_video
    insmod: unresolved symbol avia_av_unregister_video_event_handler
    insmod: unresolved symbol avia_av_get_video_size
    insmod: unresolved symbol avia_av_play_state_set_audio
    insmod: unresolved symbol avia_av_read
    insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation
    insmod: unresolved symbol avia_av_new_audio_config
    insmod: unresolved symbol avia_av_set_video_system
    insmod: unresolved symbol avia_av_bypass_mode_set
    insmod: unresolved symbol avia_av_sync_mode_set
    insmod: unresolved symbol avia_gt_dmx_queue_nr_get_bytes_free
    insmod: unresolved symbol avia_gt_dmx_get_ucode_info
    insmod: unresolved symbol avia_gt_vbi_start
    insmod: unresolved symbol avia_gt_dmx_queue_reset
    insmod: unresolved symbol avia_av_napi_decoder_stop
    insmod: unresolved symbol avia_gt_dmx_queue_stop
    insmod: unresolved symbol avia_gt_dmx_queue_irq_enable
    insmod: unresolved symbol avia_gt_dmx_set_pcr_pid
    insmod: unresolved symbol avia_gt_vbi_stop
    insmod: unresolved symbol avia_av_audio_pts_to_stc
    insmod: unresolved symbol avia_gt_dmx_queue_write
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext
    insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
    insmod: unresolved symbol avia_gt_dmx_disable_framer
    insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
    insmod: unresolved symbol avia_av_napi_decoder_start
    insmod: unresolved symbol avia_gt_dmx_queue_start
    insmod: unresolved symbol avia_gt_dmx_tap
    insmod: unresolved symbol avia_gt_get_info
    insmod: unresolved symbol avia_gt_dmx_enable_framer
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_video
    insmod: unresolved symbol avia_gt_dmx_free_queue
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_user
    insmod: unresolved symbol avia_gt_dmx_get_stc
    insmod: unresolved symbol avia_gt_accel_crc32
    insmod: unresolved symbol avia_av_write
    insmod: unresolved symbol avia_gt_set_playback_mode
    insmod: unresolved symbol avia_gt_get_playback_mode
    insmod: unresolved symbol avia_av_is500
    insmod: unresolved symbol avia_av_read
    insmod: unresolved symbol avia_av_new_audio_config
    insmod: unresolved symbol avia_av_cmd
    insmod: unresolved symbol avia_gt_get_info

    Please press Enter to activate this console. grep: /var/keys/camd3.config: No su
    ch file or directory
    grep: /var/keys/camd3.config: No such file or directory
    rm: cannot remove `/var/etc/.slot0_start': No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    rm: cannot remove `/var/etc/.slot1_start': No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    rm: cannot remove `/var/etc/.slot3_start': No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/camd3.config: No such file or directory
    grep: /var/keys/gbox_cfg: No such file or directory
    rm: cannot remove `/var/etc/.slot_com': No such file or directory
    grep: /var/keys/gbox_cfg: No such file or directory
    rm: cannot remove `/var/etc/.slot_multi': No such file or directory
    rm: cannot remove `/var/etc/.com_betad': No such file or directory
    rm: cannot remove `/var/etc/.multi_betad': No such file or directory
    [CBasicClient] connect failed.
    /tmp/sectionsd.sock: No such file or directory
    $Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini, patched by GLJ-Team (JohnDoe
    ) Exp $
    [zapit] PMT update enabled
    [CBasicClient] connect failed.
    /tmp/sectionsd.sock: No such file or directory
    [getservices] /var/tuxbox/config/zapit/myservices.xml found.
    [getservices] dup transponder id 1 onid 85
    [getservices] dup transponder id 3 onid 85
    [getservices] dup transponder id 4 onid 85
    [getservices] dup transponder id 11 onid 85
    [getservices] dup transponder id 43E onid 1
    [getservices] dup transponder id 438 onid 1
    [getservices] dup transponder id 442 onid 1
    [getservices] dup transponder id 412 onid 1
    [CBasicClient] connect failed.
    /tmp/sectionsd.sock: No such file or directory
    /tmp/currentservices.xml: No such file or directory
    [audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: No such file or directory
    [video.cpp:CVideo:33] /dev/dvb/adapter0/video0: No such file or directory
    [aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
    $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

    [controld] Boxtype detected: (1, Nokia D-BOX2)
    [controld] /dev/dvb/adapter0/video0: No such file or directory
    [controld] /dev/dvb/adapter0/video0: No such file or directory
    [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
    [CBasicClient] connect failed.
    /tmp/sectionsd.sock: No such file or directory
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    [camd2] /dev/dvb/adapter0/demux0: No such file or directory
    [CBasicClient] connect failed.
    /tmp/sectionsd.sock: No such file or directory
    [nhttpd] Neutrino HTTP-Server starting......Patched GLJ-Team (JohnDoe)
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
    [LCDFONT] Intializing font cache...
    ping: Google Host name lookup failure
    $Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
    [sectionsd] Caching max 2500 events
    [sectionsd] Caching 1 days
    [sectionsd] Events are old 60min after their end time
    /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
    /var/tuxbox/config/mybouquets.xml: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    /tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
    /tmp/neutrino)
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [neutrino] frameBuffer Instance created
    /dev/fb/0: No such file or directory
    framebuffer not available.
    FBIOPUT_VSCREENINFO: Bad file descriptor
    FBIOGET_FSCREENINFO: Bad file descriptor
    [neutrino] Error while setting framebuffer mode
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    zapit shot down :)
    Waiting for controld (max. 9 seconds)
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    [basicsocket] send_data: Resource temporarily unavailable
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 8 seconds)
    [basicsocket] send_data: Resource temporarily unavailable
    lastChannelRadio2: 4
    lastChannelTV2: 418
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 7 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 6 seconds)
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 5 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 4 seconds)
    [sectionsd] getUTC: open: No such file or directory
    ping: Yahoo! Host name lookup failure
    Waiting for controld (max. 3 seconds)
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 2 seconds)
    [sectionsd] getUTC: open: No such file or directory
    Waiting for controld (max. 1 seconds)
    [sectionsd] getUTC: open: No such file or directory
    CXA2092 found
    The system is going down NOW !!
    Sending SIGTERM to all processe[nhttpd] stop requested......
    Sending SIGKILL to all processes.
    Requesting system halt.

    Und hier mal der Log vom Flashen

    debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.2 mID 01
    debug: feID dd gtxID 0b
    debug: fpID 5a dsID 01-2c.ec.3c.07.00.00-2d
    debug: HWrev 09 FPrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
    debug: &_end 0x34894, &__stack 0x400000
    debug: Memory tests (0x400000 -- 0x2000000)
    debug: NumberTest: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoM
    IPS
    debug: BMon V1.2 mID 01
    debug: feID dd gtxID 0b
    debug: fpID 5a dsID 01-2c.ec.3c.07.00.00-2d
    debug: HWrev 09 FPrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
    debug: &_end 0x34894, &__stack 0x400000
    debug: Memory tests (0x400000 -- 0x2000000)
    debug: NumberTest: debug: passed
    debug: MarchTest: debug: passed
    debug: PermTest: debug: passed
    dbox2:root> boot net
    debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.24
    debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
    will verify ELF image, start= 0x800000, size= 201596
    verify sig: 262
    boot net: boot file has no valid signature
    Branching to 0x40000


    ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

    Initializing...
    CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
    Board: ### No HW ID - assuming TQM8xxL
    DRAM: (faked) 32 MB
    Ethernet: 00-50-9c-42-e5-67
    FLASH: 8 MB
    LCD driver (KS0713) initialized
    BOOTP broadcast 1
    TFTP from server 192.168.1.2; our IP address is 192.168.1.24
    Filename 'C/Programme/tftpboot/logo-lcd'.
    Load address: 0x130000
    Loading: ##
    done
    LCD logo at: 0x130000 (0x1F9FFC0 bytes)
    BOOTP broadcast 1
    TFTP from server 192.168.1.2; our IP address is 192.168.1.24
    Filename 'C/Programme/tftpboot/logo-fb'.
    Load address: 0x120000
    Loading: #########
    done
    FB logo at: 0x0 (0x1FC0000 bytes)
    AVIA Frambuffer
    Input: serial
    Output: serial


    1: Console on ttyS0
    2: Console on null
    3: Console on framebuffer
    Select (1-3), other keys to stop autoboot: 0
    dbox2-ppcboot> bootp 120000 /C/Dbox_root/2x/glj_neutrino_270407_sat_2x.img
    BOOTP broadcast 1
    TFTP from server 192.168.1.2; our IP address is 192.168.1.24
    Filename '/C/Dbox_root/2x/glj_neutrino_270407_sat_2x.img'.
    Load address: 0x120000
    Loading: #######################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ######################
    done

    dbox2-ppcboot> protect off 10020000 107fffff
    ...............................................................
    Un-Protected 63 sectors

    dbox2-ppcboot> erase 10020000 107fffff
    Erase Flash from 0x10020000 to 0x107fffff
    sector 66 .... done
    Erased 63 sectors

    dbox2-ppcboot> cp.l 120000 10020000 1F8000
    Copy to Flash... done

    dbox2-ppcboot>

    Migiman hat wohl recht:
    avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
    avia_av_core: Starting avia_av_wdt thread.
    avia_av: timeout waiting for decoder init to complete. (00000001)
    insmod: init_module: avia_av: Input/output error
    insmod: unresolved symbol avia_av_set_stc
    insmod: unresolved symbol avia_gt_gv_copyarea
    usw.............
    ist wohl der avia chip.
    Was mich etwas irritiert ist das hier:
    Erase Flash from 0x10020000 to 0x107fffff
    sector 66 .... done
    Erased 63 sectors

    Sollten da wenn 66 sectoren gefunden wurden nicht auch 66 gelöscht werden?

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!

Benutzerkonto erstellen Anmelden