Hallo zusammen,
Das Problem an sich ist das meine Nokia Dbox2 beim Laden der Kernels sich immer wieder resetet. Das GLJ Image lief vorher ohne Probleme. Jetzt habe ich versucht mit dem Flash Assi über Nullmodem und Ethernet die Box neu zu flashen. Netzwerkkarte ist auf 10MBs/half Duplex gestellt und auch eine feste IP vergeben. Habe auch schon mehrere Images probiert (GLJ, Petze, Keywelt) Bekomme immer folgenden log:
Ist die Box kaputt? Oder hat vielleicht jemand eine Lösung?
Vielen Dank
Rimme
Þdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.221, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.221; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.221; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.221; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.221; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.0.221; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
##########################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.221; our IP address is 192.168.0.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #################################################################
##################################################
done
Bytes transferred = 587229 (8f5dd hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626984 Bytes = 612.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 587165 Bytes = 573.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f1f000, end 01fae59d ... OK
Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.0.202:192.168.0.221:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:15:42:f5
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.202, domain=, nis-domain=(none),
bootserver=192.168.0.221, rootserver=192.168.0.221, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 573k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.13.0 (2008-11-29 23:52:02 CET
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
dbox2 - ImageFlashingAssistent 3.x
- Hallenberg.com -
Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
[color="Red"]tftp: server error: (1024) Zeitüberschreitung[/color]
done.
Sende Backup...
While trying to open /tmp/flash.img: No such file or directory
Sie koennen die dbox jetzt ausschalten.
-------------------------------------------------------------
BootP: Request von 00509C1542F5 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1542F5 gesetzt
BootP: Antwort an 00509C1542F5 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1542F5 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1542F5 gesetzt
BootP: Antwort an 00509C1542F5 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1542F5 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1542F5 gesetzt
BootP: Antwort an 00509C1542F5 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Users\Rimme\Downloads\Keywelt_V1_September_2x_SQUASHFS_2009\Keywelt_V1_September_2x_SQUASHFS_2009.img
TFTP: Transfer nicht erfolgreich
TFTP: Schreibe Backup nach C:\Program Files (x86)\DBOX_IFA\Backups\2010-02-13 11-55-46_285.img
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller (0)
IP-Adresse des Netzwerkadapters: 192.168.0.221
IP-Adresse die die dbox bekommt: 192.168.0.202
Betriebssystem: Professional (Build 7600)
CPU 1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz @ 3400 MHz
CPU 2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz @ 3400 MHz
CPU 3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz @ 3400 MHz
CPU 4: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz @ 3400 MHz
Dateiname des Images: Keywelt_V1_September_2x_SQUASHFS_2009.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.2
------ Powered by http://www.dboxservice-hallenberg.de ------
