[color="Red"][SIZE="3"]Wie ich neue Software mit DreamUp auf die Dreambox DM 800 HD se spiele:[/SIZE][/color]
[color="DarkOrange"]Dreambox 800 HD se und Service-Anschluss:[/color]
Wenn man mit dem Service-Anschluss ( Zum Updaten der Betriebssoftware )
arbeiten möchte, muss man folgenden Treiber vorher Installieren:
[color="Red"]VCP Treiber - (USB to UART Bridge Virtual COM Port (VCP) Treiber)[/color]
Link: https://www.zebradem.com/53158-dreambox…rvice-anschluss
[color="DarkOrange"]Crossover-Kabel & USB Typ A - Mini USB Typ B:[/color]
[color="DarkOrange"][SIZE="2"]DreamUP Version 1.3.3.7:[/SIZE][/color]
First disconnect the box from main power
start the program "DreamUp"
Trennen Sie die Dreambox als erstes vom Netz
Starten Sie das Programm "DreamUp
select: comport 1 or 2
use network
if network: enter the local IP from your PC, enter a remote IP for your Box
bitte wählen Sie den Com Port aus, an dem Ihre Dreambox angeschlossen ist
Auswahl: Mit Netzwerk / ohne Netzwerk
wenn Netzwerk: Lokale IP des PC's eingeben, Fremd-IP für die Box eingeben
press the "Connect" - button
and then connect the box to main power
please wait now
den "Verbinden"-Knopf anklicken
und dann das Netzkabel der Box wieder einstecken
bitte nun warten
after the flash loader is transfered into the Box select the firmware by pressing
the "Flash" - button
nachdem der flash loader zur Box übertragen wurde, wählen Sie über den
Knopf "Box flashen" die Betriebssoftware aus
select the firmware and click "open"
Betriebssoftware auswählen und auf "Öffnen" klicken'
upload starts now, please wait
Das Hochladen wird gestartet, bitte warten
Box is flashing the new firmware into the flash memory, please wait
Box kopiert die neue Betriebssoftware in den Flashspeicher, bitte warten
flashing done, press "OK"
press "disconnect then exit"
restart the box
"Die Box wurde erfolgreich geflasht", bitte dann auf "OK" klicken
auf "Trennen / dann Beenden" klicken
Box neu starten