Gigablue HD 800 UE Plus

• Format (USB) flash drive in FAT32 with smallest block-size
• extract Image to flash drive and make sure that the whole directory structure (Gigablue\<boxtyp>) was extracted
• safely remove flash drive
• unplug power cord from box and plug flash drive into rear USB port
• plug in power cord
• You will have to press OK Button (covered under the flap and not the on on your remote!!) when display promts: Solo,SE: "CONF" or UE,Quad: "Image found, confirm with OK"
• while flashing your LED flashes purpil. Additionaly your box displays Solo,SE: "LOAD" "E0000-E0100" or on UE,Quad: "flashing in progress"
• Be patient, flashing takes a while ( Solo: ca. 30 min. SE,UE,Quad: ca 3 min. )
• when finisched box reboots automaticly
• you are done

thx nikki

open atv 5.1

install iptvlistupdater from feed