KabelBW NDS Karte in der DBOX2 (Multicam)

This is NewCS 1.60 - the New CardServer
Compiled on May 19 2008 at 20:58:50
Reading Config file from /var/tuxbox/co
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,udp,tcp
logger config: level 1 type 3 output 7
Console log options: level 1 type 3
udp log: host IP-Adresse des Hosts port
Host lookup of IP-Adresse des Hosts fai
logger: cant connect udp to IP-Adresse
TCP log options: level 1 type 3
[ 11:30:22 ] [ Box detect ] Box type 4
[ 11:30:22 ] [ Config ] Option <mhz> fo
ulting to 357
[ 11:30:22 ] [ Config ] /dev/tts/0 ECM
[ 11:30:22 ] [ Config ] /dev/tts/1 ECM
[ 11:30:22 ] [ Config ] Option <spider>
to NO
[ 11:30:23 ] [ httpd ] httpd-user: newc
[ 11:30:23 ] [ EMM Cache ] Initialising
[ 11:30:23 ] [ ECM Cache ] Initialising
[ NewCS ] Process ID is: 503
[ 11:30:23 ] [ Loader ] Starting Telnet
[ 11:30:23 ] bind: error! 98: Address a
Can't create server: Address already in
[ 11:30:23 ] [ Loader ] Reader type 4 o
[ 11:30:23 ] [ Dbox ] Opening device /d
[ 11:30:24 ] [ Loader ] Reset failed ..
[ 11:30:24 ] [ Loader ] Starting Newcam
[ 11:30:24 ] [ Loader ] Reader type 4 o
[ 11:30:24 ] [ Dbox ] Opening device /d
[ 11:30:24 ] [ Newcamd ] Newcamd thread
[ 11:30:24 ] bind: error! 98: Address a
[ 11:30:26 ] [ Loader ] Unknown card
[ 11:30:26 ] [ Loader ] Trying Irdeto (
[ 11:30:26 ] [ Loader ] Reader type 4 o
[ 11:30:26 ] [ Dbox ] Opening device /d
[ 11:30:27 ] [ Loader ] Unknown card
[ 11:30:27 ] [ NewCS ] Ready to GO! :)

# Wenn Parameter gebraucht wird - '#' entfernen und eure Werte reinsetzen!!!!!


# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500, 5-dm56xx/Triax; Default ist 2
BOXTYPE=1
#
# UDP Port(optional); Defailt - 20248
#UDP_PORT=20258


# HTTP Port(optional); Defailt - 9080 ( 0: HTTP-server ausgeschaltet)
#HTTP_PORT=9080
#
# HTTP Login: Default - admin:camd3
#HTTP_ADMIN=***
#HTTP_PASSWORD=***




# TCP Port(optional); Defailt - 0 (TCP-server ausgeschaltet)
#TCP_PORT=24115
TCP_PORT=0


# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
LOG=6


# Host für UDP-logging
LOG_HOST=IP-Adresse des Hosts


# Port für UDP-logging(optional); Default ist 514
#LOG_PORT=514


# DNS cache in sekunden; Default ist 60 sec
DNS_CACHE=600


#Wenns ruckelt und knackt
#der Wert ist vielleicht aber überflüssigt
DESCR_DELAY = 750


# Logfile
#LOG_FILE=/tmp/log/camd3.log


# Pfad zum User-File(optional); Default ist /var/keys/camd3.users
#USERS=/var/keys/camd3.users


# Pfad zum Server-File(optional); Default ist /var/keys/camd3.servers
#SERVERS=/var/keys/camd3.servers


# Pfad zum Key-File(optional); Default ist /var/keys/camd3.keys
#KEYS=/var/keys/camd3.keys


# Pfad zum Socket-File(optional); Default ist /tmp/camd.socket
#SOCKET=/tmp/camd.sock01


# AU für original Slot dbox2 (optional): 1-ein, 0-aus; Default ist 1
DBOX2_AU=1


# Multichannel mode (optional und nur für DM7000 und DM7020): 0-aus, 1-ein; Default ist 0
MULTI=0




# Kartenslots (anzahl beliebig)
# je eine Zeile für Slot:
#SLOT=devicename:type:au_g:au_s:au_u:port:username:password:deskey
#
# deskey für normale Slots ist optional, aber port,username und password müssen immer angegeben werden!!!
#
# devicename: Pfad (volständig) zum Device, oder Hostname von cardserver(newcamd)
# type: 1-serial, 2-intern(dreamox), 4-cardserver(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: 12000
#USERNAME: *****
#PASSWORD: *****
#DESKEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14(14 byte)
SLOT=127.0.0.1:4:1:1:1:34001:user:password:0102030405060708091011121314


#SLOT=/dev/tts/0:1:1:1:1:997:mastercrd:password1
SLOT=/dev/tts/1:1:1:1:1:997:multicam:2580
DESCR_DELAY=750#KW-sockcheck

<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>CardReader</name>
<type>dbox</type>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>Multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>375</mhz>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>


</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>IP-Adresse des Hosts</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<allow>lower</allow>
<allow>upper</allow>
</user>
<user>
<name>user</name>
<password>password</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>




</newcamdserver>
</newCSconfig>

have fun with KEYWELT on your Sagem D-BOX2 - Kernel 2.4.36.2-dbox2 (10:39:51)...
dbox login: root




BusyBox v1.7.2 (2008-06-12 20:38:01 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.


/var # cd /var/bin
/var/bin # newcs
This is NewCS 1.60 - the New CardServer by the Butter-team..
Compiled on May 19 2008 at 20:58:50
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,udp,tcp
logger config: level 1 type 3 output 7
Console log options: level 1 type 3
udp log: host IP-Adresse des Hosts port 1000
Host lookup of IP-Adresse des Hosts failed
logger: cant connect udp to IP-Adresse des Hosts:1000, udp log disabled
TCP log options: level 1 type 3
[ 10:40:30 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:40:30 ] [ Config ] Option <mhz> for device 0 (CardReader) not present, defa
ulting to 357
[ 10:40:30 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:40:30 ] [ Config ] /dev/tts/1 ECM priority: round
[ 10:40:30 ] [ Config ] Option <spider> not present for User: dummy, defaulting
to NO
[ 10:40:30 ] [ EMM Cache ] Initialising dynamic Cache
[ 10:40:30 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 505
[ 10:40:30 ] [ Loader ] Starting Telnet on port 3001
[ 10:40:30 ] [ Loader ] Reader type 4 on node /dev/tts/0
[ 10:40:30 ] [ Dbox ] Opening device /dev/tts/0
[ 10:40:30 ] bind: error! 98: Address already in use
[ 10:40:32 ] [ Loader ] Reset failed ...
[ 10:40:32 ] [ Loader ] Starting Newcamd Server on port 34000
[ 10:40:32 ] [ Newcamd ] Newcamd thread Server started on port 34000
[ 10:40:32 ] bind: error! 98: Address already in use
[ 10:40:32 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 10:40:32 ] [ Dbox ] Opening device /dev/tts/1
[ 10:40:33 ] [ Loader ] Unknown card
[ 10:40:33 ] [ Loader ] Trying Irdeto (T=14)
[ 10:40:33 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 10:40:33 ] [ Dbox ] Opening device /dev/tts/1
[ 10:40:35 ] [ Loader ] Unknown card
[ 10:40:35 ] [ NewCS ] Ready to GO! :)