1. Dashboard
  2. Mitglieder
    1. Letzte Aktivitäten
    2. Benutzer online
    3. Team
    4. Mitgliedersuche
  3. Filebase
  4. Forum
  5. Zebradem-WIKI
  6. Foren-Regeln
  7. Spenden Liste
    1. Spenden
  • Anmelden
  • Registrieren
  • Suche
ZebraDem-Sponsoring
Dieses Thema
  • Alles
  • Dieses Thema
  • Dieses Forum
  • Seiten
  • Dateien
  • Forum
  • Erweiterte Suche
  1. Forum
  2. Receiver
  3. D-Box II
  4. Flashen und Debuggen

(gelöst) Dbox Nokia Kabel tot??

  • 0815flieger
  • 21. Oktober 2010 um 08:10
  • 0815flieger
    Profi
    Punkte
    7.055
    Beiträge
    1.336
    • 21. Oktober 2010 um 08:10
    • #1

    Hab mit ner Dbox2 Nokia Kabel tiefgreifendes Problem, wo ich nicht mehr weiter weiß. Vielleicht kann mir jemand helfen.
    Hatte ZD Images drauf und bin mit scam am probieren um CS zum Laufen zu bekommen. Nach mehrmaligen online Updates und configs erstellen, jedoch ohne Erfolg (was CS angeht) hab ich ein MD-Images neuester Version in den /tmp. Ordner geschoben, dann Flashvorgang mit FB eingeleitet, Balken sind bis zum Ende durchgelaufen und die Box hat Neustart durchgeführt.
    Box startet nun mit "Lade..." dann steht "Autoboot:1" im Display und anschließend kommt "U-Boot 1.3.1" und das wars. Weiter gehts nicht. Ein Neuflash nimmt sie nicht, auch nicht mit dem Flashassi. Vorgang wird immer abgebrochen.
    Fehlt da irgend ein Loader oder was?? Was kann man machen, um sie wieder zum Leben zu erwecken?
    Gruß vom Flieger

    • Zitieren
  • shortcut
    Gast
    • 23. Oktober 2010 um 00:37
    • #2

    Nach 822 Beiträgen in diesem Forum sollte man wissen was zu tun ist, ansonsten mehr lesen statt sabbeln!

    • Zitieren
  • Online
    sossenprinz
    Profi
    Punkte
    8.370
    Beiträge
    1.623
    • 23. Oktober 2010 um 00:43
    • #3
    Zitat von shortcut;369064

    Nach 822 Beiträgen in diesem Forum sollte man wissen was zu tun ist, ansonsten mehr lesen statt sabbeln!

    sehr hilfreich,wenn du nichts dazu beitragen kannst lass doch einfach die finger von der tastatur

    • Zitieren
  • tuete2501
    Moderator
    Reaktionen
    1
    Punkte
    23.011
    Beiträge
    4.204
    • 23. Oktober 2010 um 09:38
    • #4

    @shortcut

    Zitat

    Nach 822 Beiträgen in diesem Forum sollte man wissen was zu tun ist, ansonsten mehr lesen statt sabbeln!

    Dein Beitrag hat nichts mit dem Thema zu tun, eine hilfreiche Antwort wäre besser gewesen ;)

    Zitat

    auch nicht mit dem Flashassi. Vorgang wird immer abgebrochen.

    Hast Du das flashen mit Hallenberg gemacht?
    Hast Du die Box direkt am PC über Lan & Serial angeschloßen?
    Hast Du den richtigen Lankabel, sollte der gedrehte Crossoverkabel sein?

    [color="SeaGreen"]Hier sind Anleitungen,von unserem Wiki[/color]

    • Zitieren
  • shortcut
    Gast
    • 23. Oktober 2010 um 11:13
    • #5
    Zitat


    Hast Du den richtigen Lankabel, sollte der gedrehte Crossoverkabel sein?

    Das Kabel ist Neutrum.

    In Deutschland sagt man ,,Das Kabel".
    Kauf dich mal ein Duden, hat mich auch gehelft.
    Oder lade dir einen Hauptschulabschluss runter!

    • Zitieren
  • killaone
    Meister
    Punkte
    10.925
    Beiträge
    2.161
    • 23. Oktober 2010 um 11:22
    • #6

    @shortcut

    hör doch mal auf mit der Rumstinkerei...

    Das gehört hier nicht her. Solche Leute wie dich möchten wir nur ungern im Board haben, da du Nichts anderes machst als rumzuhetzen.

    • Zitieren
  • lolly
    Gast
    • 23. Oktober 2010 um 11:27
    • #7

    Ob der Kabel, die Kabel oder dass Kabel.

    Wir machen uns hier nicht über Schrfeibfehler oder Rechtschreibschwächen anderer lustig.

    Und bitte immer On-Topic bleiben.

    Ich bitte das zu beherzigen.

    • Zitieren
  • Gast
    Gast
    • 23. Oktober 2010 um 11:48
    • #8

    Moin,

    nur zur Info. shortcut hat von mir eben die gelbe Karte bekommen.

    Zitat

    shortcut Nach 822 Beiträgen in diesem Forum sollte man wissen was zu tun ist, ansonsten mehr lesen statt sabbeln!

    einmal dafür und

    Zitat

    shortcut Das Kabel ist Neutrum.

    In Deutschland sagt man ,,Das Kabel".
    Kauf dich mal ein Duden, hat mich auch gehelft.
    Oder lade dir einen Hauptschulabschluss runter!

    einmal dafür.

    Grüße

    urs

    • Zitieren
  • 0815flieger
    Profi
    Punkte
    7.055
    Beiträge
    1.336
    • 24. Oktober 2010 um 09:04
    • #9

    So, bin die letzten 2 Tage nicht viel zum Lesen hier gekommen.
    Danke erstmal für die Antworten.
    @tuete: hab mit Hallenberg versucht, aber wenn ich dann nach Anweisung den Netzstecker stecke, tut sich überhaupt nichts. Display der Box steht dann wieder dasselbe, was ich schon geschrieben habe.
    Hab die Box dran am PC mit LAN und Crossoverkabel.
    Aber die grünen Balken fangen nicht an zu Laufen.
    Also beide Programme ausprobiert, Hallenb. Flashassi und auch den Bootmanager. Nix geht.
    Gruß vom Flieger

    • Zitieren
  • majestro1
    Gast
    • 24. Oktober 2010 um 10:49
    • #10

    Hi
    Nur noch mal dumm gefragt ein Nullmodemkabel hast du doch auch angeschlossen oder?

    • Zitieren
  • tuete2501
    Moderator
    Reaktionen
    1
    Punkte
    23.011
    Beiträge
    4.204
    • 24. Oktober 2010 um 13:22
    • #11
    Zitat

    Display der Box steht dann wieder dasselbe, was ich schon geschrieben habe.


    Da wird wohl der Flashversuch nicht geklappt haben, da der Speicher nicht gelöscht wurde.

    Zitat

    Hab die Box dran am PC mit LAN und Crossoverkabel.

    - Serialkabel & Crossoverkabel

    Bitte überprüfe auch, wenn Du mehr als einen Lananschluß am PC haben solltest, dass der richtige ausgewählt wurde.

    • Zitieren
  • 0815flieger
    Profi
    Punkte
    7.055
    Beiträge
    1.336
    • 24. Oktober 2010 um 14:33
    • #12

    Meine natürlich das Nullmodemkabel und das Crossover.
    Die Kabel waren beide korrekt und beide dran. War auch def. ein Nullmodem.

    @tuete...Speicher nicht gelöscht? wie bekomm ich denn den Speicher gelöscht?
    Gruß vom Flieger

    • Zitieren
  • Don de Deckelwech
    Anfänger
    Punkte
    30
    Beiträge
    6
    • 24. Oktober 2010 um 21:07
    • #13

    Hi,
    dann poste doch mal ein Log vom Flashversuch, am besten vom Bootmanager.
    Steht zwar wahrscheinlich eh ein "Boot net failed" drin, aber evtl ja noch mehr interessantes.

    Ciao,
    DdD.

    • Zitieren
  • Gast
    Gast
    • 25. Oktober 2010 um 19:28
    • #14

    Hallo,
    habe mir mal heute die Box von 0815Flieger angschaut und versucht zu flashen.
    Hänge mal das Log File drann. Vieleicht hat ja jemand ne Erleuchtung.
    cu erwin23

    • Zitieren
  • Gast
    Gast
    • 25. Oktober 2010 um 19:32
    • #15

    Ach so nun die gehostete Datei
    http://rapidshare.com/files/427097051/flash.txt
    Anders bekomme ich die Textdatei nicht ins Forum.
    cu erwin23

    • Zitieren
  • 0815flieger
    Profi
    Punkte
    7.055
    Beiträge
    1.336
    • 25. Oktober 2010 um 20:42
    • #16

    erwin, du weißt nicht bescheid mit der txt Datei:D:D

    Hier ist der Log:


    debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-db.db.2d.07.00.00-b8
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0036

    will verify ELF image, start= 0x800000, size= 166144
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.3.1 (Tuxbox) (Dec 26 2008 - 16:21:41)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: done.
    find_inode failed for name=tuxbox
    load: Failed to find inode
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET
    Scanning JFFS2 FS: done.
    find_inode failed for name=tuxbox
    load: Failed to find inode
    ready - can't find logo in flash
    Scanning JFFS2 FS: done.
    find_inode failed for name=tuxbox
    load: Failed to find inode
    can't find logo in flash

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ............................................................... done
    Un-Protected 63 sectors
    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    ### FS load complete: 670238 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 670174 Bytes = 654.5 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.36-dbox2 (geko37@linux) (gcc version 3.4.6) #7 Fr 26. Dez 16:2
    4:25 CET 2008
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock1 rootfst
    ype=squashfs console=ttyS0
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    squashfs: version 3.0 (2006/03/15) Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    half-duplex mode enabled
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:8c:6a
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00420000 : "root (squashfs)"
    0x00420000-0x007e0000 : "var (JFFS2)"
    0x007e0000-0x00800000 : "FLFS (U-Boot)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    init started: BusyBox v1.2.1 (2008.12.31-16:34+0000) multi-call jffs2_scan_eras
    eblock(): Magic bitmask 0x1985 not found at 0x00000000: 0xf0a4 instead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x0301 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0x007e in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x0002 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x7475 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x7862 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x6f78 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x6673 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x0001 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000002c: 0x0001 in
    stead
    Further such events for this erase block will not be printed
    Empty flash at 0x00008fe8 ends at 0x00008fec
    Empty flash at 0x00010180 ends at 0x00010184
    Empty flash at 0x0001d258 ends at 0x0001d25c
    Empty flash at 0x0001d428 ends at 0x0001d42c
    Empty flash at 0x0001d4d0 ends at 0x0001d4d4
    Empty flash at 0x0001d6bc ends at 0x0001d6c0
    Empty flash at 0x0001d800 ends at 0x0001d804
    Empty flash at 0x0001d9d8 ends at 0x0001d9dc
    Empty flash at 0x0001df30 ends at 0x0001df34
    Empty flash at 0x0001e03c ends at 0x0001fe28
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x7371 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x0100 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0x2f00 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0xb800 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0xc840 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0x0003 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x049a in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0x4001 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020028: 0x8fb7 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020030: 0x0408 in
    stead
    Further such events for this erase block will not be printed
    Empty flash at 0x00020070 ends at 0x00020074
    Old JFFS2 bitmask found at 0x0003389c
    You cannot use older JFFS2 filesystems with newer kernels
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0xac7b in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x7aa0 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x28de in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x8b8a in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x0e0d in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x08a1 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x0294 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xce77 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0xaa9d in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0x46b6 in
    stead
    Further such events for this erase block will not be printed
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0x020e in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x1235 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x1ed0 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x505b in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0xdd88 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0xb8c3 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x699d in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0x0747 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x01d2 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xdd7e in
    stead
    Further such events for this erase block will not be printed
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x073e in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0xf532 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x53ce in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0x7b8c in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0x7255 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xea3d in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0x1195 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0xdd7f in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x0fb5 in
    stead
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0x70e1 in
    stead
    Further such events for this erase block will not be printed
    Old JFFS2 bitmask found at 0x0008583c
    You cannot use older JFFS2 filesystems with newer kernels
    jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0xe48e in
    stead
    jffs2_scan_eraseblock()

    • Zitieren
  • BackBlues
    Schüler
    Punkte
    690
    Beiträge
    130
    • 26. Oktober 2010 um 21:46
    • #17

    Welches Betriebssytem nutzt du?

    wenn du WinXP nutzt probier es mal mit Mediasensing als Patch für die Registry gab da nämlich damals öfter probleme (weswegen ist mir nun zuviel zu erklären Google hilft)

    [url=http://www.xup.in/dl,21046947/Mediasensing.zip/]Download: Mediasensing.zip | xup.in[/url] << das ist es

    • Zitieren
  • Reppo
    Super Moderator
    Punkte
    69.655
    Beiträge
    12.683
    • 26. Oktober 2010 um 21:59
    • #18

    Man sieht im Log, dass überhaupt nicht begonnen wird zu flashen.
    Wie im letzten Post gesagt, Mediasensing aus, Netzwerkkarte am besten auf 10 Mbit/s halfduplex stellen, Hyperthreading bei Pentium 4 Prozessoren ausschalten, Dualcore abschalten, Firewall, bzw. Virenscanner aus und dann sollte es gehen.

    • Zitieren
  • bonzaii
    Meister
    Punkte
    10.620
    Beiträge
    2.044
    • 26. Oktober 2010 um 22:13
    • #19

    ... und nicht vergessen: Auch eine DBox2 wird nicht ewig halten ... viel Erfolg!

    • Zitieren
  • Gast
    Gast
    • 27. Oktober 2010 um 06:10
    • #20

    Hallo,
    ich dachte, das das beim flashen auch nur die Com aussreicht.
    cu erwin23

    • Zitieren

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!

Benutzerkonto erstellen Anmelden

Spenden

Vielen Dank für die Unterstützung!
Hiermit unterstützt du Zebradem.
Das beinhaltet überwiegend die Serverkosten und Lizenzgebühren.
Spenden

Letzte Beiträge

  • Elektronische Patientenakte: Sicherheitsbedenken durch den CCC

    Katze Flohli 10. Mai 2025 um 08:58
  • Festnahmen von Online-Drogenhändlern in Deutschland

    heugabel 9. Mai 2025 um 08:27
  • KJM kritisiert öffentliche Sperrlisten

    heugabel 8. Mai 2025 um 14:27
  • Plex Live TV / LG Channels / Wedo TV

    Fellfresse 7. Mai 2025 um 21:31
  • Samsung TV Plus/Rakuten TV

    scarface247 7. Mai 2025 um 19:35
  • Deutsche Bank Sicherheitsvorfall: Romantische Eskapaden im Rechenzentrum

    heugabel 7. Mai 2025 um 17:27
  • Social-Media-Verbot für Kinder: Ein Blick auf Deutschlands Herausforderungen

    Katze Flohli 7. Mai 2025 um 16:46
  • Die Pornhub-Sperre in Deutschland: Ein kurzes Fazit

    Katze Flohli 7. Mai 2025 um 07:29
  • Pluto TV

    Fellfresse 6. Mai 2025 um 19:11
  • IPTV-Piraterie 2025: Ein Blick auf das illegale Streaming

    heugabel 5. Mai 2025 um 12:27

Aktivste Themen

  • Umbau D-Box II von Philips

    64 Antworten
  • Ich brauche hilfe

    55 Antworten
  • D Box bootet nicht

    53 Antworten
  • Nokia DBox2 nach flashen kein start mehr

    46 Antworten
  • Nokia 2xI Bmon 1.0

    43 Antworten
  • Flash auslöten , Bootloader neu flashen?

    41 Antworten
  • Komme nicht in Debug-Modus

    39 Antworten
  • Neues Image aufspielen

    36 Antworten
  • Box resettet immer

    35 Antworten
  • falsch geflasht - Box startet nicht

    32 Antworten
  1. Kontakt
© 2024 Zebradem - Software by WoltLab